After a lot of interest on our socials we have opened up a registration of interest to get an idea of numbers for our production run. If you are interested in a set in the next few weeks put this zero value order through and we will notify you when...

Billet anodised black MX5 oil filler cap. Uses the stock filler cap rubber seal. Simply push out of the stock cap and push into your shiney billet one for a great seal.

Individual throttle body conversion kit for any 1600 mk1/mk2 89-05 engine. Comes complete with: Manifold 42mm throttle bodies Throttle body rubbers with stainless clips Throttle position sensor New throttle position sensor plug to be...

A billet turbo inlet to suit Garret GT2860 and GT2560 turbos. It has a raduised entry to aid airflow and an o-ring on the sealing face. It is designed to suit a 63.5 or 2.5" hose. It comes complete with stainless steel fasteners.

A set of 3 bolts with the same thread as the gearbox bolts but longer and a through bolt so that you can use them to bolt your engine to a stand.

Our new MX5 NA/NB billet water pump inlet. Designed for you hardcore track car guys or Exocet / MK Indy / Westfield guys that don't run a heater matrix. Makes for an easy connection straight into the bottom of your radiator. It comes with a 9/16...

When you swap a 1.6 NA to modern stand alone engine management you can do away with the air valve that is on the side of the inlet manifold. This billet CNC machined blanking plate has o-rings in the back so no messy sealant required. There...